Results 1 to 2 of 2
Thread: Cura Profile ABS 0.3mm Prusa MK3
-
09-15-2018, 02:28 PM #1
- Join Date
- Sep 2018
- Posts
- 2
Cura Profile ABS 0.3mm Prusa MK3
Hi,
We have attached a very good Cura profile for 3D printing in ABS using the Prusa MK3.
The layer height is set a 0.3 mm. The profile is a good general starting point for any ABS part (whose resolution can be at 0.3 mm).
A bit of tuning will be necessary depending on the part itself, but the main things are there.
We hope it will help new ABS printers getting started.
-The DustnPrint Team,
-
09-15-2018, 05:38 PM #2
I will download your setting to see where my fall in line.
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help