Results 1 to 8 of 8
Thread: Having problems with my PLA
Threaded View
-
08-19-2018, 08:49 PM #1
- Join Date
- Aug 2018
- Posts
- 3
Having problems with my PLA
I am having problems with my PLA. I have had this printer for a while (my first one). I thought I could figure things out on my own. I have been humbled. Lol. I have tried for months, I have printed a few things. But I am having issues. Monoprice Maker Select 3D Printer v2PLA Filament also from MonopriceExtruder Temp: 200Bed Temp: 55In my several attempts at a successful print. I have removed the surface that came with the printer to the bare aluminum. I used blue painters tape with purple disappearing glue. I aligned the Z-carriage and leveled the bed with a feeler gauge measuring .0101MM. I printed a bed level calibration. I can't tell what it is telling me. Is my speed too fast? Is my temp too high? I can't seem to get it.I humbly ask for help. When I get good enough to help, I will.
Last edited by bobbiebryant; 08-20-2018 at 12:39 AM.
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion