Results 1 to 5 of 5
Threaded View
-
08-08-2018, 10:33 AM #1
- Join Date
- May 2018
- Posts
- 8
New way to wash and cure for resin 3D printers!
Hi all,
Some of you may have unpleasant experience of dealing with IPA and sticky part after using the SLA or DLP printers. Also, the current commercial products are way too expensive for normal 3D printing users. I recently found out a good solution which may keep your hands free from all those troubles. Moreover, it is cost-effective. Any comments will be highly appreciated!
Frontview.jpgAirCure-SideGif.jpgCuring in action.jpg
Here is the link for more details:
https://www.kickstarter.com/projects/2041445054/aircure-system-for-sla-printing?ref=discovery&term=aircure
Extruder not feeding during print,...
04-24-2024, 01:59 AM in Tips, Tricks and Tech Help