Printing half of a stand to hold RC cars. I have printed the same file before with out issues but with a different filament, didn't have the issue. As you can see on the uprights there's strings hanging off. This is the 1st time I have seen this, had the fine hair like strands at times but nothing like this.






Printer: Wanhao Duplicator i3 Plus
Filament: Dazzle Light PLA
Temp: 210
Bed temp 60
Speed 60
Slicer Cura 3.04

To me it looks like it's travelling while still extruding if so what could be causing this?