Results 1 to 5 of 5
Thread: How to improve this benchy?
Threaded View
-
10-27-2017, 02:46 AM #1
- Join Date
- Oct 2017
- Posts
- 19
How to improve this benchy?
Prusa i3 mk2s
Sliced with Cura, default settings, 0.2mm, no supports. Using black PLA
Any suggestions?
print temp 200
plate temp 60
flow 100%
layer height 0.2mm
print speed 60 mm/s
travel speed 120 mm/s
print cooling enabled
skirt build plate adhesion
infil 20%, grid, layer thickness 0.2
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion