Here is a photo of what is happening with my printer. It is printing a few concentric squares, which are great other than the fact that one edge got sort of lifted off the kapton tape and dragged around a bit. I have the heat on the bed at 72C, and some people are telling me "you don't need to heat the bed with PLA!" is that true?

Extruder is 190.

IMG_0381.jpg

Code:
; layer_height = 0.3
; perimeters = 3
; top_solid_layers = 3
; bottom_solid_layers = 3
; fill_density = 0.4
; perimeter_speed = 20
; infill_speed = 60
; travel_speed = 130
; nozzle_diameter = 0.4
; filament_diameter = 1.72
; extrusion_multiplier = 1
; perimeters extrusion width = 0.42mm
; infill extrusion width = 0.42mm
; solid infill extrusion width = 0.42mm
; top infill extrusion width = 0.42mm
; first layer extrusion width = 0.60mm