Results 1 to 2 of 2
Threaded View
-
05-20-2017, 05:23 PM #1
- Join Date
- May 2017
- Posts
- 12
How hard is it to design something to print?
I have a project which is still on my desk but 3D printing would be better, it involves printing translucent cup holders for my car and having a LED under each one so the ring lights up I did mockups with some acrylic I got but it was messy and a pain to cut.
If I could figure this out it would be the first thing I've done on my own I'm just not well versed in the 3D design software.
Extruder not feeding during print,...
04-24-2024, 01:59 AM in Tips, Tricks and Tech Help