Results 1 to 3 of 3
Thread: Complete Noob
-
04-13-2017, 09:16 PM #1
- Join Date
- Apr 2017
- Posts
- 2
Complete Noob
I have recently completed building my Hictop 3d printer and have little to no idea how to fix a couple issues. First thing is that the filament continuously extrudes from the nozzle when it is heated up so I have to remove it before a print begins. This usually leads to a messy base for the printed object. Second and a much bigger problem is that whenever the object prints it goes in a diagonal pattern. I am trying to print a simple robot and it should print upwards. Any ideas on what i should be looking at? Like I said I am completely new to this
-
04-13-2017, 10:11 PM #2
- Join Date
- Apr 2017
- Posts
- 2
Tightening the Y axis motor seemed to help, printing now, will update in the near future
-
05-08-2017, 05:23 AM #3
Extruder not feeding during print,...
04-24-2024, 01:59 AM in Tips, Tricks and Tech Help