Troubleshooting TPE w/ Powerspec I3 plus

[curious aardvark]

For something that size I'd probably use 0.2mm layer height not 0.3.

Also do you have a print area cooling fan ?
Good idea to use one - particularly with very small items.

And what filament are you actually using ?
Extruder Temps would suggest abs while bed temps would suggest pla, although too cool. (should be 60 for pla).

So that's a little confusing. 235 is way too hot for extruding pla and too cool for pet-g and abs. While bed temp is way too cool for abs and petg and slightly too cool for pla.

Also what surface are you printing on ?