So the settings for Cura2 that currently work for me are laid out in the pictures below.
You must create a profile for the Minitoy before you change the "Print Setup" settings.
The profile will need to have the correct "Machine Settings" and the settings that work best for me are in the first pic I posted below. I'm sure they could be tweaked, but so far I'm printing really good models with these settings.

When you open Cura2, select the profile you created for the Minitoy. After you open the STL file, change the printer settings to match the pictures below.
Again, I'm sure the settings could be tweaked for each model you print, but these are working for me quite well. I've printed a number of great items with the settings.

You should watch some videos on Cura2 to get a better understanding of the settings. You will want to adjust them to the types of items you are printing.

Please let me know if this helps and if you have other suggestions.

Screen Shot 2017-01-30 at 4.25.58 PM.jpg
Screen Shot 2017-02-12 at 4.21.42 PM.jpg
Screen Shot 2017-02-12 at 4.22.26 PM.jpg