Close



Results 1 to 6 of 6
  1. #1

    Biocompatible Filament?

    Hello!
    I am currently working on a project that involves 3D printing in the context of medical devices. So here's my question: are there any 3D printing materials that are both flexible and biocompatible?
    Thanks in advance for any answers!

  2. #2
    Engineer ralphzoontjens's Avatar
    Join Date
    Nov 2013
    Location
    Tilburg, the Netherlands
    Posts
    533
    Follow ralphzoontjens On Twitter Add ralphzoontjens on Facebook Add ralphzoontjens on Shapeways Add ralphzoontjens on Thingiverse
    Hyrel is working on a silicone filament coming in various grades. It needs post-curing after printing.
    Contact them for biocompatibility - http://www.hyrel3d.com/materials/
    It will need to be carefully researched and in line with all governmental regulations.
    It will be interesting to research its suitability for small joint replacement.

    Stratasys does a lot in medical prototyping / 3d printing, they will have biocompatible materials as well.

  3. #3
    Staff Engineer Davo's Avatar
    Join Date
    Nov 2013
    Location
    Atlanta, GA
    Posts
    1,085
    Follow Davo On Twitter Add Davo on Facebook Add Davo on Google+ Add Davo on Shapeways Add Davo on Thingiverse
    We print with PEEK, PCL and PU, all of which are US FDA approved for internal medical applications, but none of these is especially flexible.

    There are probably approved silicones which which we can print, but we haven't tried any specifically approved for internal applications.

  4. #4
    Engineer-in-Training
    Join Date
    Jul 2016
    Location
    Pennsylvania, USA
    Posts
    255
    Hi

    Some of this can be a bit application dependent. A little more information on what you are trying to do might be helpful.

    Bob

  5. #5
    Engineer ralphzoontjens's Avatar
    Join Date
    Nov 2013
    Location
    Tilburg, the Netherlands
    Posts
    533
    Follow ralphzoontjens On Twitter Add ralphzoontjens on Facebook Add ralphzoontjens on Shapeways Add ralphzoontjens on Thingiverse
    Along that line, does anyone have experience 3D printing running shoes or soles?
    I have used FlexPLA but it does not seem to be durable and flexible enough and does not print very well either.
    I am wondering if there is a flexible SLA resin available that works for this application, or a TPU or other powder for SLS as used by Materialise.

  6. #6
    Staff Engineer
    Join Date
    Jan 2014
    Location
    Oakland, CA
    Posts
    935
    You might try a service using an Objet polyjet machine: http://www.stratasys.com/3d-printers...jet-technology

    These machines can print flexible material with multiple durometers in the same print. It has been used for shoe soles (if price is no objet...) Not sure about biocompatibility, though.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •