Hi everyone, I'm new to this forum, and fairly new to 3D printing too.
I've been experimenting with printing using POM (1.75mm in Black, from Hobbyking) and have looked around various forums to see how other people managed to get it to stick to anything (it is really slippery stuff).

Anyway I thought I'd share the method I'm using having had some success.

I have found that it sticks very well to cotton. So I got a piece of board (tufnol in this case, but you could use anything) and glued a sheet of cotton (an old pair of boxer shorts, washed of course!) to it using Impact adhesive.
It seems to work really well.

The heat settings I'm using are; 215 C for the extruder, and 105 C for the bed.

A large brim seems to reduce the amount of warping too.


I'd be really interested to hear how other people are getting on with printing POM, and if anyone has any further tips/comments....