Subscribe to Our Newsletter Advertise
Close



Results 1 to 8 of 8

Threaded View

  1. 05-05-2016, 04:34 PM #1
    DennisH.
    DennisH. is offline
    Student
    Join Date
    May 2016
    Location
    Texas, USA
    Posts
    9

    Why is my print skewed?

    I have a Prusa I3 M201 front Geeetech.

    This is supposed to be the first 35 layers of a box with straight sides, but as you can see the box is skewed. Can anyone tell me what caused this. It is leaning in the X direction. I have printed other boxes that were perfectly sized and shaped. This was printed with pla at 225 on a cold glass plate.

    The printer was a kit and is new. This is only the 3rd or 4th print I've tried. The feed mech was tricky was get working.

    angle.jpg

    side.jpg
    Last edited by DennisH.; 05-05-2016 at 04:39 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules