Results 1 to 3 of 3
-
04-03-2016, 09:26 PM #1
- Join Date
- Apr 2016
- Posts
- 2
ZBrush to Meshmaker to FFM Printer
Hi Folks.
This is my first post and I am still very new to 3D Printing.
Previously I have been sculpting using clays, making moulds, and pouring resin in to them to create small items. Nothing larger than a hand, and rarely smaller than a little finger tip.
Technology etc has pushed me to get a small FFM printer (Afinibot A9). At the moment I cannot afford a FDM one.
I am looking at using ZBrush to sculpt my items in and have 4R7 so I can output a STL file directly. From what I have read it looks like the output polygon density will be pretty high since most prints I have seen have been done on the UV Resin system.
Has anyone here done the same but used a FFM printer. I am very interested in any hints and tips you can provide. I have mention of using Meshmaker on the outputted STL to hollow out the model to same material.
Many many thanks
Dave a.k.a. Marcwolf
-
04-04-2016, 10:55 AM #2
ZBrush is perfectly capable of hollowing out models...
-
04-04-2016, 06:08 PM #3
- Join Date
- Apr 2016
- Posts
- 2
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials