I got the opportunity to do a test print and timelapse for one of 3DFacture's potential customers. It was by far the most difficult thing I have tried to print and the highest resolution part I've done. The STL file was over 800MBs, it took a fair amount of time just to setup the print because my computer slowed down so much haha. If you watch the video and notice in creation workshop that pretty much every time I do anything creation workshop stops responding and I have to wait for everything to catch up.

I'm super excited with how everything turned out in the end because some features on this print are as small as hair and I'm not even joking. Here are some pictures, the link to the video is at the bottom. The printing parameters are in the video description.

https://drive.google.com/open?id=0B6...VBDVTdyX0UyOTQ

https://drive.google.com/open?id=0B6...Ep6dHZEemxKanc

https://drive.google.com/open?id=0B6...0ZTVTRrRGRLZjg

https://drive.google.com/open?id=0B6...G1KLXpZMkItcHc

https://drive.google.com/open?id=0B6...HdRM0FaMWZGS1k

https://drive.google.com/open?id=0B6...0hSVUhtN1p3ekU

Here is the timelapse and video overview of this print, enjoy!
https://www.youtube.com/watch?v=DEq-8Sm_yS0