Results 1 to 4 of 4
-
02-28-2016, 06:46 PM #1
- Join Date
- Feb 2016
- Posts
- 10
breaking prints due to sticking TO much
I was having issues with curling on the edges when printing things, so i thought it was time to ditch the blue masking tape and print directly on my acrylic bed. but now things are sticking and i am breaking them when trying to removing them.
should i be coating my bed with something to help with release or is it to much filament on my first layer?
Please help
Thanks
Troy
-
02-29-2016, 02:42 AM #2
If it's too much filament on the 1st layer, you would see it easily : in that case the filament "piles up" and you have blobs being formed.
-
02-29-2016, 09:36 AM #3
- Join Date
- Feb 2016
- Posts
- 10
Yeah the first layer looks just as nice as the rest, so i guess its not to much, i tried rubbing some vegetable oil on the bed and it seemed to have helped with my first trial print we will find out once i get home tonight to see if it worked for the second.
-
03-01-2016, 07:18 AM #4
- Join Date
- Mar 2016
- Location
- Stockholm
- Posts
- 13
Maybe use Sitall glass? i read about it on 3dprinterchat https://3dprinterchat.com/2016/02/si...-glue-or-tape/ I dont use that though i use wolfbite but Magicgoo pens have also been awesome
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help