CTC printer settings

[EagleSeven]

It's the tool head offset (For those wondering I mean the distance between the extruders) . When I updated to Sailfish, all of my home axis remained, but my tool head offset had been set to 0, so when the printer used the left nozzle it went way left and started clicking before attempting to print.

If I remember correctly there is a Firmware setting to select which nozzle is #0 and which is #1.
(new firmware may have the nozzles Reversed ? )
So, maybe if you switch those it will fix the startup location and keep them over bed-plate ?
Then select the correct nozzle in slicer software as primary (#0) and secondary (#1),
to select which to use when printing.