Results 1 to 3 of 3
Thread: Not Sticking
-
12-23-2015, 11:52 PM #1
- Join Date
- Dec 2015
- Posts
- 1
Not Sticking
Hi All,
I got new Sharebot xxl Next Generation Printer. The Heatedbed not heating properly, the center part of heated bed is not heating.
-
12-24-2015, 10:24 AM #2
If you just got it and it isn't work properly you really should be looking into getting it replaced.
-
12-27-2015, 08:06 PM #3
Hi! I agree with what Sebastian said. If you just got it recently and your first print automatically fails because of heated bed, then most likely your heated bed is already malfunctioning. Try to contact the seller and have it replaced, or see if they can give you some advice on how to troubleshoot it (incase of misconfigured setting whatsoever). But I honestly think the first one is most likely the issue here.
Ender 3 Neo - Jam Problem
Yesterday, 03:06 PM in Tips, Tricks and Tech Help