Results 1 to 2 of 2
Thread: xzyscan has stopped working
-
12-22-2015, 06:43 AM #1
- Join Date
- Dec 2015
- Posts
- 1
xzyscan has stopped working
Hi all,
I am new to 3d printing and I purchased an XYZ Printing da Vinci 1.0 AiO printer which prints just great.
Trouble is, I can't get the xyzscan software to co-operate.
The scanner is calibrated and works fine and scans ok giving me a good scan preview but as soon as I proceed in the software I get a Windows error message: "xyzscan has stopped working".
Sounds like a Windows compatibility issue between the xyzscan software and Windows?
I have all the latest firmware and software versions installed on Windows 10 (God help me).
Any advice?
Thanks
Richard
-
12-22-2015, 10:40 AM #2
I think that software Only works with a DaVinci printer, correct ?
If so, I doubt that many on this forum has tried it .
I think I would try to find a W-7 OS computer to try first.
Note: Only scan we have used is 123D-Catch photo-scanner and it works fairly well
but still needs a lot of editing to get it correct enough to printLast edited by EagleSeven; 12-22-2015 at 10:49 AM.
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion