Results 1 to 1 of 1
Thread: Makerbot Object Removal
-
10-21-2015, 06:04 PM #1
- Join Date
- Oct 2015
- Posts
- 1
Makerbot Object Removal
Hello all,
My team and I are trying to make a vending mechanism to remove the object from the replicator 5th generator platform. We are hitting some blocks. Listed below are some of my concerns and any assistance or advice is greatly appreciated.
1) Without a heated bed, removing object appears to be very hard using a automated 'shovel' powered by a motor. Namely, to move it from right to left to 'fall' into a bin. It should be noted the vending mechanism will eventually be enclosed by a frame.
Essentially, that is it, the main concern is removing the object. We have a design already planned out, we are worried that the force required to remove objects will apply a large and perhaps fatal shear force to the supports/cylindrical supports for the printer platform.
Thanks again.
Spencer
Ender 3 Neo - Jam Problem
Today, 10:12 AM in Tips, Tricks and Tech Help