Results 1 to 5 of 5
Thread: spiking issue
-
09-26-2015, 03:08 AM #1
- Join Date
- Sep 2015
- Location
- South Australia
- Posts
- 89
spiking issue
Hi anyone had this problem, see images attached, seem to be getting spiky bits during the print, ithis is leading to warped prints ,
also there is a funny grinding sound when moving in the x axis?
the part is supposed to be a small box, also are the extruder fans supposed to be functioning during the print?
SAM_5684.jpgSAM_5686.jpgSAM_5688.jpg
-
09-26-2015, 12:32 PM #2
- Join Date
- Aug 2015
- Posts
- 256
-
09-27-2015, 06:39 PM #3
- Join Date
- Sep 2015
- Location
- South Australia
- Posts
- 89
-
09-27-2015, 07:27 PM #4
DjPrinter is right. Your temperature is way too high. Try reducing your temperature at an interval of 5 degrees until you achieve your desired 3d print quality.
-
09-27-2015, 09:23 PM #5
- Join Date
- Sep 2015
- Location
- South Australia
- Posts
- 89
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion