Results 1 to 4 of 4
Thread: Help
-
09-18-2015, 09:33 AM #1
Help
Anytime we try to print anything larger than a few cubic inches, the print will print a little bit, the shift over, print more, then shift more.
Every time we print something, the shifting gets worse.
I'll post pics later, the forum is giving me errors right now.
please help.
-
09-18-2015, 09:41 AM #2
- Join Date
- Mar 2015
- Posts
- 5
Sounds like you need to adjust your drive belt, because it is slipping.
-
09-18-2015, 06:50 PM #3
-
09-20-2015, 01:37 AM #4
- Join Date
- Sep 2015
- Posts
- 9
as Dylad said, you very likely have a belt slipping. Makerbot has guides on their support pages on how to adjust your drive belts.. should fix your problem.
Do bed magnets deteriorate.
04-29-2024, 01:35 AM in General 3D Printing Discussion