Large spiral vase

[bbinnard]

This large vase printed in 34 hours 12 minutes with a layer height of 0.200mm. I sliced ​​it with Simplify3D and had no problems with printing other than a fair number of hairs. I used a hair dryer and a little sandpaper to get rid of these .

1.jpg

2.jpg

3.jpg
I have done a number of experiments involving retract length, retract speed, Z-lift, and varying temperature, and it seems that it is just not possible to eliminate hairs with a Bowden-tube style printer.

You can get the STL File for this part here:

http://www.thingiverse.com/thing:1020197

or here:

https://pinshape.com/ite.../10372-3d-printed-large-spiral-vase