FlashForge Build Bed screw size in four corners #4 or M3?

[abesau]

Guys, do you guys know the exact size of the four screws holding the build bed down in the four corners.
I measured what I thought a .112 (#4) 4-40 or 4-48?? but that's very close to an M3 and without a thread guage I can't
tell for sure.

Thanks for your help

[curious aardvark]

all the screws/bolts I've used on mine have been m3's.

And given that when I added the plastic adjusters it was an m3 nut I slotted into the finger wheel - I'm pretty certain that the tension bolts are m3.
http://www.thingiverse.com/thing:243998

But that might not be what you mean :-)

[abesau]

Thanks for you fast response curious. I'm going to assume M3 is the right answer.

all the screws/bolts I've used on mine have been m3's.

And given that when I added the plastic adjusters it was an m3 nut I slotted into the finger wheel - I'm pretty certain that the tension bolts are m3.
http://www.thingiverse.com/thing:243998

But that might not be what you mean :-)

[ffvader]

yeah m3's it is..