Results 21 to 22 of 22
Thread: Hexagon vs E3D V6
-
09-14-2015, 01:31 PM #21
- Join Date
- Jul 2014
- Posts
- 305
So I spent some time yesterday trying to narrow down the problem even further.
I got the filament to feed easily by hand so I don't think the nozzle is clogged.I then looked into the diameter of the feed from the hobbled bolt to the extruder and mine is at 4.00mm +/- .2mm.
So I will purchase some aluminum tubing that should narrow that diameter to 2pm like printbus stated above.
-
09-19-2015, 10:31 PM #22
- Join Date
- Jul 2014
- Posts
- 305
Printbus:
I am happy to say you have solved my problem! I am printing with an aluminum collar inside of the extruder like you recommended and my hobled bolt is not chewing filament or making any sort noise like it used to.
I thank you so much!
Ender 3 Neo - Jam Problem
Yesterday, 03:06 PM in Tips, Tricks and Tech Help