Results 1 to 3 of 3
Thread: fan 0 fan 1 ports
-
04-22-2015, 01:00 AM #1
- Join Date
- Mar 2015
- Posts
- 32
fan 0 fan 1 ports
so im finishing up the build and only have my x carriage to finish wiring and was wondering why you hook the hexagon hotend cooling fan to the power supply vs. using the rumba board fan0 or fan 1 ports to control it
Last edited by neverlift; 04-22-2015 at 01:22 AM.
-
04-22-2015, 08:53 AM #2
- Join Date
- Nov 2014
- Location
- New Orleans
- Posts
- 50
Which board are you using? There are a few threads here on using FAN1 to control the cooling fan with RUMBA. I used a spare thermistor cable and plugged the fan into a 2 pin +12v power lead on my RUMBA.
Chadd posted a nice write up here: http://3dprintboard.com/showthread.p...ighlight=rumba
-
04-22-2015, 09:18 AM #3
- Join Date
- Mar 2015
- Posts
- 32
thank you that is exactly the type of info i was looking for.
Please explain to me how to...
Today, 03:08 PM in 3D Printer Parts, Filament & Materials