Plz help. I have no idea whats wrong with my print or how to fix it.

[savemejeebus]

This is how it should look:
rabbit01_preview_featured.jpg

This is how mine looks:
IMG_4142.jpg
IMG_4143.jpg

To me it seems like whole chunks are sliding along the x-axis, but I'm new to this and my instincts have failed me so far. Any suggestions or ideas?

My Cura settings:
Extruder temp: 210
Bed Temp: 60
Layer height: .15
Shell thickness: .8
Fill density: 20%
Print speed 80
Travel Speed: 100
Bottom layer speed: 20
Initial layer thickness: .26
Retraction speed: 10mm/s