Help Needed, Strange Stringy print (Not overhangs)

[Arcadenut]

I'm using the FlashForge Creator Pro and Simplify3D

On this print I'm now getting this stringy parts that I used to never get. Any ideas on what might be causing this?

stringy print.jpg

[curious aardvark]

no picture - so, nope, no idea :-)

[34Ford]

I switched to Simplify3D last weekend and you may have the same thing I cant figure out. I am getting spider webs when my head moves from one wall over to the other. So I am playing around with the Ooze Control. Tried the Coast at end and didnt see a change.

[Arcadenut]

Ok, I solved this issue.

I had the wrong profile selected for the Process, so both Extruders where at temp. Once I switched the profile to the single extruder I wanted, it printed as expected.

[curious aardvark]

once i saw the pic - it was obviously a temperature issue - ie: too much of it :-)

[Todd-67]

Temp, speed and bed leveling/height are the first areas to look for that problem.