Subscribe to Our Newsletter Advertise
Close



Results 1 to 2 of 2
  1. 03-30-2015, 10:59 AM #1
    sasabs
    sasabs is offline
    Technician
    Join Date
    Dec 2014
    Posts
    61

    nozzles different heights

    On Creator - My left nozzle is lower then my right. From factory - never changed. If right nozzle correct left gouges?

    How do I adjust?

    Follow up - Problem was easely solved by removing two screws holding extruder to carriage and inserting a paper washer on the low nozzle below the aluminum bar.. To get thickness of washer level plate so low nozzle just touching plate. Determine the height of high nozzle (mine was two thicknesses of paper).
    Last edited by sasabs; 03-31-2015 at 10:07 AM.
    Reply With Quote Reply With Quote
  2. 03-30-2015, 01:42 PM #2
    Rspraggjr
    Rspraggjr is offline
    Student Rspraggjr's Avatar
    Join Date
    Jan 2015
    Location
    USA
    Posts
    13
    Follow Rspraggjr On Twitter Add Rspraggjr on Facebook Add Rspraggjr on Thingiverse
    Your're answer is here:
    http://3dprintboard.com/showthread.p...-across-prints
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules