Results 1 to 6 of 6
Thread: switching printer off
-
02-02-2015, 03:42 PM #1
- Join Date
- Jan 2015
- Posts
- 14
switching printer off
new to this but can anyone tell me should I let the fan on the extruder /nozzle stop as its cooled down nozzle ect or is it ok just to turn of once ive finished printing
thanks in advance
dave
-
02-02-2015, 08:18 PM #2
-
02-03-2015, 06:43 AM #3
- As a general guideline for most all electronic and mechanical components let the systems finish the cooling cycle before turning off power. In the aspects of a hot end its probably not going to cause any major damage, but skipping the cooling cycle is not going to help machine life.
-
02-03-2015, 07:07 AM #4
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
It is also the case that if you remove power then the extruder stepper is no longer locked and if the filament is liquid at that time the filament may pull back due to stretch from the filament holder so next time you try to print the filament has to be reloaded. My Wanhao is a bugger for doing this.
-
02-03-2015, 07:54 AM #5
- Join Date
- Jan 2015
- Posts
- 14
ctc with dual extractors andnozzles a copy of the makerbot
-
02-03-2015, 07:55 AM #6
- Join Date
- Jan 2015
- Posts
- 14
thanks for that much appreciated
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials