Start with printing a calibration cube.
It prints ok?
Also what temps are you using?
I guess you have PLA.
Type: Posts; User: Dant3
Start with printing a calibration cube.
It prints ok?
Also what temps are you using?
I guess you have PLA.
For the record,
I sold the printer and got an Ender 3 V2.
Works great so far with my old filaments.
So I guess it was printer related issue.
Is it just 1 layer?
If yes,then you need to increase a bit the distance of the nozzle with the bed.
Also experiment a bit with the temps of the filament.
There is a setting about how much the...
Well here is a vid.
The motherboard was on a chair with connected just the necessary.Heater,thermistor and the extruder.Nothing else.
You can clearly listen to the extruder clicking.
Note that the...
I goy a box and placed all my filaments inside alongside with all the silicone tabs that are given with the filaments,electronics etc.
I tried that and nothing changed.
I got a whole new...
Yeah,I will upload a video.
For now I'm doing some tries with increased temperature.
Looks like 210 C and up ,PLA somehow manages to print.Anything lower than 205 and within a minute,the extruder...
Dismantled the printer ,at least the electronics and reconnected everything.
Also disassembled the hotend once again.
I swapped the stepper from E0 to E1.Same happens.
Also swapped the hotend from...
Well mine definetely has no sockets.
The motherboard is a MKS 1.4
Well I think I can try to connect the extruder to the E1 plug.
It supports dual extrusion so I guess it should be able to do that.
I guess I have to replace the motherboard if the motor driver chip has gone bad?I have a soldering iron if it is replaceable and I can replace it.
The PTFE liner has been replaced.
I have...
Tried another Slicer,same happens.
I m gonna go ahead and dismantle the whole printer,at least the electronics to make a visual inspection.
Next I m gonna replace the motherboard.
If these dont...
Good evening,
For almost 3 years I have a stock Tevo Tarantula,except for some minor improvements.
Some months ago while printing a 4 hour PETG print my nozzle clogged for the first time ever.
I...