TC1967UK
You could try and follow the wires back and disconnect it from both ends. Then select in your slicing software as extruder1. Let me know how it goes.
John
Type: Posts; User: JohninLex
TC1967UK
You could try and follow the wires back and disconnect it from both ends. Then select in your slicing software as extruder1. Let me know how it goes.
John
Curious Aardvark,
That is a great thought, I would try it by cutting a ram on both ends and pressing it and letting it cool and trimming the sides. Let me know how it goes. If it works I know of...
ProtolateTry slowing your print down while it is printing. Turn the knob to reduce F/R on the control box.John
Check your thermister on the hot end, and the connection to the board.
Reliku
Let me ask a couple questions. I don't feel this is filament related
1. What 3d printing software are you using? IE Cura, slicer
2. Can you confirm that the gantry is tight?
3. Can...
Reliku
Let me ask a couple questions. I don't feel this is filament related
1. What 3d printing software are you using? IE Cura, slicer
2. Can you confirm that the gantry is tight?
3. Can...
try printing your black PLA at about 215 c and slow it down to about 50 % and see if this improves your print.
Quarinteen,
Your printer is using a modified version of the Marlin firmware. There is an auto home function in the menu. As far as leveling the bed I would use a piece of paper to do so.
The...
With a little more research I found that the threaded rod that I have now is a "Lead 8." I went ahead and ordered a "Lead 2" thread from Ali Express. This should fix my issue.
I am unsure of how...
I bought a Tevo Tarantula a little over a year ago. I have been having really nice prints out of the printer. I wanted to make some taller prints so I ordered the parts to make the printer taller. 1...