I am not quite sure what would cause this...
Printer: AnyCubic Kobra Max
Filament Type: PETG
Not near my printer at the moment so can't grab slicer settings, but like I said I've done multiple...
Type: Posts; User: RDaugherty
I am not quite sure what would cause this...
Printer: AnyCubic Kobra Max
Filament Type: PETG
Not near my printer at the moment so can't grab slicer settings, but like I said I've done multiple...
Hi!I'm still having some issues with this problem, here is a latest print, temperature is lowered ect.
Thanks for the reply!
Min. Infill Length was: 5.00, will adjust.
Extrusion multiply I have not changed, its at .90
Outline overlap is set at 20, will drop it to 15.
Nozzle is .40
So I've resolved to use PETG for some outdoor prints (was solely using ABS) and after some tweaking ect. I was able to get the prints to come out pretty good except for the top layer/infill maybe?
...
On some things I am getting a really good infill and prints, but on other things I randomly pull from ThingiVerse or elsewhere that doesn't have any specific setting changes I've had some issues...
Update..3.0?I've been in contact with Qidi through out this 2 month process but I uploaded the new part failing to them and they concurred that this is the issue. They are sending me all-metal...
In case it matters / help. Here is what my PTFE tube ends up looking like everytime this happens.
16477
Side note… after giving this some thought, while replacing the PTFE tube and nozzle a couple of times I’ve always had the PTFE tube go INTO the nozzle. Like, st least 1-2mm of the PTFE tube goes...
In case it’s a case of me needing to replace the entire hot end assembly…. Do I need to order a specific one or is there an after market one that fits my model that I can swap to? Anyone know of the...
I will look into this. Thank you, I have had to replace my PTFE/nozzle due to clogging issues of the PTFE tube but I thought that was because something with the Z-Axis (being too close at some point...
Update 2.0 ...
So I guess I was mistaken in thinking my designed part would print well everytime. I printed this previously, without an issue, but tried a second time and this was the result. Now...
Little update;
I think the issue has to be the STL in some way.
Little history.... I've been battling this printer from day one but what I think I am doing is coming at it the wrong way. To...
Some information that might help;
Layer Height: 0.2mm
Infill: 15%
Print Speed: 30mm
Print Temp: 240 (Using PETG)
Build Plate Temp: 85
I did not print with cooling.
Not quite sure what setting this could be associated with so I'm gonna query you guys!After at least 100 hours fighting with level issues I finally got it fine tuned I think, so I moved onto trying...
So I eventually chucked the removable plate that came with the printer and just used a generic adhesion plate with clips + some paper underneath of it to fine tune the leveling and I was able to get...
I have not attempted a dual material print because I haven't been able to get a single extruder to work properly yet, lol so don't wanna throw that into the mix :D
I have literally almost used...
A: My adjustments did not resolve all my issues. I was able to get a little head way but still 3/4 of my prints would fail due to adhesion for the most part.
B: Heard back from Qidi, they are...
A little update; tentatively.... I looked under the build adhesion plate and found the like.. 12x screws that I guess holds the plate together/maybe the magnetic plate ? Either way, since these were...
So I recently bought a 3D Printer; Upgraded from a Monoprice Mini -> Qidi X-Pro and was super stoked to get to printing. But I have had non-stop issues from it.
First of all, I'll say I am in...