Whoops that might help. Its a Flashforge creator pro
What should the voltage be at the motor?
I think my tension is good
The setscrew on the belt pulley is tight
Type: Posts; User: sealfab
Whoops that might help. Its a Flashforge creator pro
What should the voltage be at the motor?
I think my tension is good
The setscrew on the belt pulley is tight
Randomly during a print I will hear a clicking sound and than discovery that my X axis has an offset layer. I tried swapping one of the extruder sterpper with the x server and I still have the same...
Some people would disagree
https://3dprintingindustry.com/news/toxic-abs-pla-fumes-3dsafety-org-inquires-vocs-60796/
as far as toxic fumes are concerned is it ok to have an enclosure with no vent tube and than just have the printer near a window fan?
Unkown ive been using pla until recently when I had the need to print parts that can be in a hotter environment. I was trying to avoid abs just because of the fumes but I think im going to give it a...
I dont have a humidity sensor to know the exact humidity in my office but it seems low and i have not had similar issues with any other filaments. Heres a shot of some extruded into mid air, it still...
Heres a pic after some widdling, whats the best way to dry the filament. Its only been out of the shring wrap for two days
http://i.imgur.com/f6cSsEP.jpg
for the sake of troubleshooting is it safe to say these are blobs? Whatever they are called what should I try to reduce or eliminate them when printing with esun PETG?
http://i.imgur.com/K13mxbO.jpg
Just got my first spool of t-glase. What can cause this? It was sliced in cura using the high clarity profile
layer_height = .5
wall_thickness = 1.2
retraction_enable = True
solid_layer_thickness...
Im maxing out the bed size on this one so I cant re-orientate. Ill try slowing it down, thanks
possibly you can find a round file or polishing stone in the correct diameter of your hold
http://www.mcmaster.com/#round-abrasive-files/=134vibm
Any tips for making this look better?
http://i.imgur.com/AO2fqZDm.jpg
It was done on a flashforge creator pro and sliced with simplify. What im referring to is the area just past the text and the...
Good to know, I have been using Makerware primarily for my slicing so Im guessing thats the issue. Sounds like I need to get up to speed with Replicator G.
Thanks for the response
What can cause this? They get a little warm during operation as expected but intermittently when they are idle they will be borderline to hot to touch.
well here is 10/15 looks like there was some abs deposited in the nozzle, im sure that is not helping but I dont think its related. I have gotten the same issue on each extruder and I know that the...
Im running it again on 10/15 fingers crossed
I just ran this 10x10x10mm cube on 40/50 with the same temp, could it be the extrusion rate or the filament im using?http://i.imgur.com/McjDuoKl.jpg
What can cause this? It doesnt seem to match any issues found here http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide This is using makerbot pla, no bed heat, 195...
I see these exhaust ducts on thingaverse that people make in order to draw fumes out with a fan but does that cause any issues when printing with abs? I would think it would cause more drafts. Is it...
I second that