Update on this.
I solved it by running though a complete calibration and following the flowrate and stepover sample tests.
Essentially the flow rate needed re calibrating and the stepover was...
Type: Posts; User: not-a-number
Update on this.
I solved it by running though a complete calibration and following the flowrate and stepover sample tests.
Essentially the flow rate needed re calibrating and the stepover was...
Plans have changed and this is no longer available.
Ive checked the extruder and it is not loose.
I swapped back the original nozzle and have the same effect.
I have re calibrated the axis on the machine and re set the Z height to 0.2mm
Also tried...
3dpUnlimited 1000
V6 hotend
0.6mm nozzle
Matterhackers Pro PLA 3mm
215C extrude temp
70C Bed temp
I was having issues with a clogging V6 hotend. I swapped over to my second extruder (same...
About $10k. It only has a couple 100 hrs on it so I feel its a good deal. Just having some samples done on it first.
Are the servos substantially better? Is it mostly a speed thing or is the reliability/quality improved?
Any reason to stay away from the stepper version?
Thanks for the reply.
What is the print speed like on the earlier machines? This one is from 2015 and has the volcano nozzle. Not sure of the nozzle diameter though.
Im not too worried about...
Looking at purchasing a 2nd hand 3DP Unlimited. What are these machines like?
I am looking at printing patterns for sand molding and I am less concerned about the surface finish and more interested...