Thanks but no luck, even trying 30mm/s :(
everything lower like 100C and my objects running all over the platform :(
Will order some petg for tests, never heard about it before, thanks
Type: Posts; User: obecny
Thanks but no luck, even trying 30mm/s :(
everything lower like 100C and my objects running all over the platform :(
Will order some petg for tests, never heard about it before, thanks
Trying to print a very small objects with lots of gaps, when starting print everything going smooth but with the time the printhead start pushing too hard on the object more and more and bending it...
Thanks, changed mine to 10% and it looks OK
print is in ABS on GLASS and hairspray
I am using raft and all the other stuff because the whole model is only 15mm tall so this is the only option to...
I have my for 30% so it looks like this is not the problem
thanks anyway
How to slow down just the first few layers,
all the layers bright green are printed too fast for such a small model, all the others ok for what I want so I don't want to slow down everything!
but...
In S3D this is under cooling tab, you can always turn it on during printing with the menu on the printer LCD (sailfish)
don't know the other software but the manual on off is enough as you cant...
I'd wish to try it as well, did you find a source of your smaller nozzles for FF ?
experimenting is not a bad thing!
I had same problem a while ago, never cut the glass so... what I did....
I purchased couple of cheapest picture frames from the local euro saver shop (couple of two packs for 1.49 each) plus cutting...
I have measured my FFCP and with printing (one nozzle) ABS at 230C with bed at 110C power consumption is at 215-225W
I think all you here are right at some point! Thanks for the great tips!
First of all it didn't look for me as it moving but after changing those corner guards for a proper strong metal clips...
Model is very small but still... quality not as expected
Simplify3d, profile: High 0.1mm, ABS 230/110
gcode to octoprint
result:...
I am using FFCPro with Sailfish 7.7 the printer has installed three end stop switches for one on each axis so when I start the home procedure is all nice and easy
but what about the other side ? is...
Sorry to say but I do both :) and many more
How many of pulleys is in creator pro ? Trying to count them and can see 8 but don't want to miss anything
They are 16 teeth all ?
My pulleys are full plastic so going to order a metal replacement...
another thing is when i upload a gcode and load it to the octoprint the object in gcode viewer is off the bed on the right front
is there something wrong with my settings ?
Ok I am slowly starting to understand this software
I have tried to upload and print from SD x3g file and this is actually not possible for now
but printing from .gcode uploaded to local memory...
Hello there, trying to setup my RaspberryPi2 with Octapri (octaprint) with my FFCPro with GPX plugin, the printer has connection with the server no problems, but the GCode Viewer or progress of the...
if I changing the layer height should I change something with the retraction as well ? I have just edited the simplify3d (high) profile with layer height 0.1m and changed it to 0.05m
should I do...
7366
Printing in ABS 230C with 110C BED 0.1mm layer in some random spots the plastic is popping up and is dragged a little by the nozzle
where could be the problem? this is happening not only at...
I have finally got my dial indicator mitutoya 2064s kind of universal look, is there any thing to print would you recommend as a mounting bracket (holder)
to use with my FF Creator Pro to have the...
Thanks for a quick answer
I have my dial indicator holder printed in ABS now, S3D medium quality 0,2mm there is some small hole on the top next to the slot for the indicator have no clue why this is...
this model above was printed in PLA now trying ABS, will see...
Hello, my new baby just arrived yesterday and was a little damaged by the courier in the transport
one of the leg was seriously damaged and Z axis out of the top holder, all of this is fixed by...
Hi there, thinking about Mankati XT Plus, would you tell me what are the advantages of this printer compared to Flashforge Creator Pro, trying to decide between those two printers, I know the mankati...
OK will keep it in mind, maybe the original FFCX extruder is not bed at all, I never see any prints made by this FFCX extruder but I believe you all can't be wrong!
Thanks