I have a problem that seems to happen with ABS filament.
The raft wants to lift from the platform at the front left-hand side never at any other place. This is a relative position, and does not...
Type: Posts; User: jstanton
I have a problem that seems to happen with ABS filament.
The raft wants to lift from the platform at the front left-hand side never at any other place. This is a relative position, and does not...
I am using a Flashforge Creator Pro. When I print with a raft, the raft fuses to the print and cannot be removed. If I don't use a raft, often the print must be removed with so much force, I am...
I am having a different extruder problem. While trying to tear down a plugged extruder, I have stripped the head of one of the 2.0 mm screws holding the turbo fan mount plate. It was so tight I...
It's OK now. I had to dismantle the extruder and remove the gob of filament. Learned a lot about my printer!
Thanks.
My left extruder has stopped working. It was fine during one session, then it wasn't. I have tried unloading the filament (PLA) and reloading it, but there has been no difference. Does anyone have...
TO continue, I repeated the same print with PLA instead of ABS. This is a Hatchback product. Same temps.
This time, about 40 minutes in, the print head began printing about 1 cm above the the...
This is my experience:
I have a FF Creator Pro with the bed surface as provided by the manufacturer.
I used ABS filament that came with the printer.
The platform was leveled.
Platform temp 110,...