I'll try that this evening. The odd thing, to me, is that the golden colored filament guide was printed only 15 minutes before the larger print (a child's mask) was started with the same exact...
Type: Posts; User: analogknight
I'll try that this evening. The odd thing, to me, is that the golden colored filament guide was printed only 15 minutes before the larger print (a child's mask) was started with the same exact...
Now that I have a proper moment to follow up on my progress. Thanks to everyone that pu in their knowledge on this. After much tinkering, and measuring, and calibrating, I can get decent results. The...
Sorry about the delay, this is my busy time of the year and was out of town when a family emergency came up. Haven't had too much time to tinker. After MUCH adjusting I have gotten it to print o.k.,...
10679
After many fixes with DAVE, the results are improving. The top layer, now, is weak, but I am hoping to fix that. I am also 50% of the way through a more techinically difficult print, as I...
After last night's call with their customer support I was able to get a print I that would say is 96% correct. It involved many corrections, but the biggest corrections came with playing with the...
No, using Cura returned a similar result, but much more efficiently sliced.
I did check that the motors and belts were tight. I locked the motors and pushed down on te carriage and did not find any play. I've tested the bed with and without issuing the G29 command.
I...
Currently, I am using Slicr with Repetier. Just completed a test with the speed turned up to 100mm/s. The issue is still present,. Watching the extruder tip closely it almost seems that the tip is...
Connections seem to be ok. Swapped connectors just in case. So after stopping the motors, there was a little play on one of the motors, and being Delta it's o that general side. I broke down the top,...
Thank you for the replies!
Marm, sorry, a total rookie mistake on my part. It is PLA 1.75MM
Curious Aardvark, I had read on a FLSun thread somewhere that better print results were achieved...
TLDR; one side of my print is totally falling apart106571065810659106571065810659
Hello! Total newb here. My wife bought me a 3D printer for father's day because she knows that I like to tinker...