EinScan Pro is absolutely fantastic.
This is an entire engine I scanned with it recently, processed and put into CAD form:
...
Type: Posts; User: Nerv
EinScan Pro is absolutely fantastic.
This is an entire engine I scanned with it recently, processed and put into CAD form:
...
Marthijn contacted us directly and I see in this thread you guys have been asking how the tutorial(s) are coming along. I haven't been on this forum in quite a while, our silence isn't intentional,...
I'll put together a detailed procedure and post it on our website soon.
Regards,
Dave @ NERV
www.NervIndustries.com
There is a very specific scan technique you can use with this scanner that almost guarantees accurate scan alignment every single scan. I have no idea how many hours I have been scanning with this...
8332
Here is a recent one... 9 gig worth of scan data. Amazing what the new software can do now.
Dave @ NERV
www.NERVIndustries.com
The software also with save as .Obj for direct import in CAD, the result of my direct request based on use with scan files in SolidWorks using the Scanto3D add-in.
That video doesn't even come close to showing the true capability of this scanner.
No coating, I used tripod mode (only mode I use - "Freescan mode") High detail mode, medium brightness.
In a previous post a while back I said this scanner will not pick up dark objects, that was...
No, I just recalibrate when the software gets updated. :)
I always use my scanner on my tripod when I calibrate. I just make sure the distance and height is as per the OEM stand and position template position provided.
Lazy susan bearing is dirt cheap at...
Hey Mike,
I suggest stop using the turntable, I'm sure it has a use (calibration), but not for any serious scanning.
Hughes, the decimation was in Meshlab. SolidWorks has the same method build...
Thanks for the feedback guys.
That scan, 1.2 GB. A properly setup quadric edge collapse decimation algorithm can knock it down to 1/10 with no visible difference.
This is another scan, the...
Wow! You sure do get discouraged quickly!
If you get a few minutes, you should read through all the threads on this forum, I think you will find that this scanner is very capable of doing more...
I'm assuming you mean integrated video from your main CPU, with it being able to have a max of 1 GB allocated to it.
The scanner will run with integrated video, I was doing so on my laptop with...
These are the typical times I found while scanning with v1.4. I didn't measure prior versions.
Scanning: 21.1 seconds typical - Same time regardless of how many scans have taken place.
Auto...
This surface roughness shown is actually really there. Very thin burned oil deposits are on that surface and I painted over them for scanning because I wasn't too concerned about such fine detail.
...
Just to show you what the EinScan-S is really capable of, this model is so accurately detailed you can pick up surface deviation that wasn't even that obvious to the eye.
The shape is what made...
After many more hours scanning I have found a really good alignment tool is a small block of wood, wrapped mostly and randomly in black vinyl electrical tape. This keeps the captured scanned data...
Your operating system may be contributing to your problems as well.
Not sure how many users are on Windows 10. I am on Windows 7 64bit professional.
Regards,
Dave @ Nerv
If the software crashes before you can close after calibration, I'm not sure the calibration has properly been saved and applied.
I have no evidence yet but stability issues and Radeon cards may...
Just to confirm what you have done thus far:
You calibrated with the turntable in the appropriate position. The calibration pattern assembly was lightly fixed to the turntable so it didn't move...
Here is a tip on calibration, let the scanner run with the projector on for a while so it warms up before you calibrate. I have found the accuracy is better if you do.
Also, be very careful when...
What type of video card do you have and how much memory does it have?
For now I use 9/16" diameter precision bearings (pinball size, can be purchased cheap from Lee Valley) that I sandblast and primer flat grey. Then, I get small 5mm diameter neodymium magnets from...
The manual alignment will only work well if you haven't scanned too much data, and if the points you select are really close to being the same points on the part. The software will try to match the...