There are a lot on Thingiverse. This is not a direct link but a search on Thingiverse, with multiple Prusa IV3 parts:
https://www.thingiverse.com/search/page:2?q=makerfarm&sa=&dwh=39598a5481f3a0d
Type: Posts; User: BLKKROW
There are a lot on Thingiverse. This is not a direct link but a search on Thingiverse, with multiple Prusa IV3 parts:
https://www.thingiverse.com/search/page:2?q=makerfarm&sa=&dwh=39598a5481f3a0d
I bought my BL Touch from Colin at Makerfarm.
I got it working, and was having issues with the probe speed.
Mine looks similar. I found a work around from the G92 command.
I changed the following while trying to find my Z-Offset:
#define Z_MIN_POS -10
#define MANUAL_Z_HOME_POS 0
This allows me to...
Do you happen to know what setting that is? I figured that is what is going on but the only option I can find is Safe Z homing, but if I disable that when it runs G28 it does it in the corner of the...
Anyone want to give me a hand?
I have the BL Touch installed and responding. A G28 command homes X and Y and then Z. However, after it probes the Z axis twice it raises the Z axis a few mm. Is...
If you visit their website:
http://www.antclabs.com/store
You can see Makerfarm is an authorized reseller.
May I ask, why you believe Makerfarm are selling clones?
It could also be a faulty Reprap Discount LCD.
You got it. The other options is to switch to the A4982 driver. I attempted to use the DRV8825 driver and got weird artifacts.
This is what you need to change:
#define...
Real talk, once you level your bed, you should not be using a Z-Offset. The first layer of the print should be above the bed by a very small amount. For example, I use a feeler gauge with a...
I use 14 AWG silicone wire. The silicone wires can tolerate higher temperatures, similar to: https://hobbyking.com/en_us/turnigy-pure-silicone-wire-14awg-1m-red.html. They are also highly flexible...
Roxy, I have a silly question for you. My Printers are now running the RC8 Marlin 1.1 RCbugfix, from Dec 2016.
I see the #define bltouch, do I just have to uncomment that and update the spacing...
Here are the files I used:
https://www.dropbox.com/sh/lp88ldb90p1holg/AACe9eAyhovURcSY2iL5Ph0ya?dl=0
Again, these are Beta designs and may have issues. I am testing them out currently.
I contemplated using integrated stepper motors with the 8mm acme thread. However, I couldn't find a company that sold them in the proper length for a decent price. After searching for a few weeks, I...
I had to print the mount for the 8mm nut here is an example: ttp://imgur.com/a/WjSmz . I also printed a mount for a ball bearing to support the top of Acme Threaded rod.
I chose the 8mm Acme...
I would highly recommend the Acme Threaded rod upgrade. I took a quick photo so please ignore the overall bad quality:
http://imgur.com/SIq6Bsz
I recently upgraded my threaded rods to 8mm Acme...
I cannot think of a specific guide, you just have to learn about the Marlin Firmware. Essentially the Marlin firmware that is run on your printer is a few text documents with settings that you can...
I upgraded my Z Axis recently to 8mm Acme (Lead Screw's): https://www.amazon.com/gp/product/B01IEYL642/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
This is a great upgrade to make on your printer...
Have you attempted to square the X Axis to the Y Axis? I don't know if this would solve your issue, but if the X Axis is skewed then it may cause this issue.
Below is a picture of what I do to...
I found the information through a Google search but there is no documentation. What you need is a 12V fan and connect it to D9 on Ramps.
I have the part cooling fan controlled by the RAMPS board. It turns on and changing speed depending on what it is printing, such as bridges, overhangs, etc.
A part cooling fan is beneficial for the majority of materials that you can print. Essentially what it is doing is cooling the filament as its being extruder making it stiffer. This helps while you...
I appreciate your opinion, I just left my comments to help the OP.
I have been working with the Titan the last 2 days. I have it installed with a pancake Nema 17 motor and I have run into zero issues. The thing just keeps printing and I love the ease of use compared...
I have a 12" Pegasus with direct drive and I print TPU with no retraction and I slow the print speed to 25% of its normal speed. It prints stringy, so you can slowly increase the retraction until it...