Apparently, green or blue lasers give better results.
Not really, I've been trying to scan really small stuff, and for that, I changed the lasers on my Atlas 3D from the original ones to focusing...
Type: Posts; User: Dudemeister
Apparently, green or blue lasers give better results.
Not really, I've been trying to scan really small stuff, and for that, I changed the lasers on my Atlas 3D from the original ones to focusing...
The Cyclop scanner is closer in functionality to the Atlas 3D, than the David Laser scanner (aka Starter Kit). That uses a calibration panel with point references behind the model during the scan. A...
I also have an Atlas 3D scanner. This a DIY Laser scanner that I bought and used with pretty decent results. It's not in the same class as the Einscan-S, and it does require some post scan work to...
As promised, here are the STL's.
They've been reduced to about 300-400K triangles, which is more than enough to preserve the details. These STL's are in the 20-30MB range, so I'm posting them...
All these are turntable scans. Most of them require multiple passes to get as much of the surface scanned, but the software does a very good job of aligning the scans (better than what I can do...
Some are straight up scans, others are partially processed. On most of them, the bottom 1-2mm weres cut off to make it flat.
Hulkbuster the bottom of the base was cut off to make it flat, and of...
I'm not sure how legal that would be, considering all these are copyrighted material. There will be other things I'll post, but I'm not sure I want to piss off the Disney Company.
Here are a...
Below are some of my scans. A lot of them are of the Disney Infinity series figure, some of other things I found around my room.
First one up, is the model I was using to improve the sharness of...
Are you saying your cameras and your projector are in perfect focus?
I'd love to see some scan samples, they should be impressive.
As I mentioned earlier, I started fooling around with some of the settings in the INI. In the Capture Settings.ini, you can change the width of the pattern lines. Here I changed the pixel width in...
I've tried that, and I used the Poisson reconstruction filter in Meshlab. Some parts look fine, and in some instances more detailed, but the algorithm used by Einscan is much better at filling in...
I've used Meshmixer to great effect to enhance and clean up scans, so I know how to do it, it's just that I was hoping to cut down some of that work.
The only way you can get sharper edges is...
This past weekend I did a little bit of work on the scanner, and found that I can easily refocus the projector.
So for this purpose, I first used a camera app to set the focus location for the...
Yeah, all of that. When I said calibrated in the post above, I actually meant white balance.
I think they (Shining 3D) need to either fix this, or don't even mention that' it's there because in...
Has anyone managed to get decent color textures? Mine are absolutely terrible. I think I tried every permutation I can think of, but the color is simply awful. I searched and found a couple of...
Small world indeed.
To answer your earlier question, the scans are good, don't get me wrong, but I would like to see sharper edges, and better detail on single line grooves and such. The model is...
Seen that one, and it looks like he adjusted the projector a bit, which is what I might try this weekend.
BTW, are you the same scobo that is active on Soliforum? I'm on that forum under my last...
I did that but unfortunately, there was no real answer. In fact someone else had a very similar issue as mine (the 2 cameras are not focusing on the same plane), was told that this is common and...
Here is a comparison photo: From left to right, the original model, the turntable mode, and the free scan mode. As you can see, the model has very sharply defined edges, which get a lot softer on...
Nobody?
Doesn't anyone else have similar issues ?
Hi, I'm new here on the forum, and the to the Einscan-S. I've used a laser scanner in the past, but the Einscan is my latest purchase.
I have no problems scanning with it, however, I'm trying to...