I got it all configured and working :) It wasn't all that hard with the newer firmware.
I should have made a spreadsheet like you for future reference but it wasn't to bad if I had to do it over....
Type: Posts; User: tfast500
I got it all configured and working :) It wasn't all that hard with the newer firmware.
I should have made a spreadsheet like you for future reference but it wasn't to bad if I had to do it over....
Awesome this was exactly what i was looking for!!! Thanks Chadd
Haven not fully read through this thread but really wanting to get auto bed leveling setup on my Makerfarm 10" i3V with Rumba board.
I am wishing I had opted for the basic RAMPS because I cant...
This is precisely what i am looking for thanks!
Been awhile since I posted. I have printed so many cool things. I love this thing, however I am fighting a few issues but the main one is the z axis homing as mentioned above. It's driving me nuts...
Awesome thanks for the config settings I will give this a go!
This was exactly my issue between not powering down properly and not running the cooling fan constantly. I ended up wiring the fan directly to the 12v coming straight from the power supply instead of...
Currently I am jammed up I cant get any filament to come out of the hot end and even if I push it by hand nothing budges. I have the hot end turned to 230 to get it to melt but nothing :/
I used simplify3d and as for the settings go I left everything default except the build area.
I will check this maybe that's what is going on. Ill report back
Edit: checked my bolts face...
I have pictures of my first prints please let me know what you guys think. Where should I begin on tweaking things?
7477
My knobs to try out for the display. Overall these turned out fine.
...
After a a quick scare thinking my rumba board was shot. For whatever reason after first power on 10 seconds in, my whole board and display turned off. Checked everything with multimeter and...
Thanks guys I will give these tips and suggestions a go and report back.
Tonight I was able to mount the power supply and electronics. I routed my power wires around the back since I did not have...
Thanks for the wicked fast reply. This helps alot thanks!
Yesterday:
I did not post my progress but I did make some I was able to work about 5 hours on the kit. I finished the frame, installed the heat bed, assembled the extruder and hot end (e3d v6...
First Thoughts:
Wow, this thing is off to a great start receiving it two days earlier than I had originally expected! Opening the box was exciting as always and the first thing I noticed and had...
I am happy to hear that some of these things wont be an issue for me with this new build.
I totally get that. I am sure I will have so much to learn maybe even more then some newbies, but I...
BobH2, thank you for great response. Although I normally would go the open source and free route, I think on this one I am going to jump the gun and go all out. After reading your response, I am...
Hello and thank you for this very detailed build thread! Will be very useful to me for my new MakersFarm prusa i3v 10" kit. I am curious how much this will pertain to the newer and bigger kit. I'm...
That looks awesome! cant wait! After talking with Colin I went ahead and bought the 10" MakerFarm i3v kit.
Hope everything turns out ok and I wont regret it... Do you think the issues you had...
Originally I have looked past all of these. However I am intrigued by the XYZ Da Vinci 1.0 AiO
Really like that it can scan coppies...
Thanks Chad for your response. I don't want to get off topic from MakerFarm, but do you have any other printer recommendations.
I must say I do expect there to be a learning curve, and some...
So I am new to 3D printing and would love to get one soon. I am very interested in the 10" or 12" Makerfarm Prusa Kits because of the build volume. Most printers I have found come no where close to...