I cleaned out the hexagon nozzle, tightened the extruder tension screws, ran the G command between calibration runs and reduced the speed to 50 mm/min and that seemed to do it. Thanks!
Type: Posts; User: Freet128
I cleaned out the hexagon nozzle, tightened the extruder tension screws, ran the G command between calibration runs and reduced the speed to 50 mm/min and that seemed to do it. Thanks!
Hi Guys,
I have a Makerfarm i3v 12" with a Rambo controller board and hexagon hot end and when I run the 100mm extrusion test that was listed in the calibration video I get these massive changes...