Trying to think through this one because there are so many things it could be... First, I must ask if you moved the 130mm by repertoire or by printer buttons. 2nd are you sure the cube stayed 30x30,...
Type: Posts; User: Snow_Man
Trying to think through this one because there are so many things it could be... First, I must ask if you moved the 130mm by repertoire or by printer buttons. 2nd are you sure the cube stayed 30x30,...
Option B... put a ruler on the platform (next to the nozzle) and move it 100mm in each direction (X, Y, Z). Test it a few times... If you consistently get say 96mm in X direction and 101 in Y...
That would definitely make it look like a clogged nozzle... pretty much does the same thing, not as much filament comes out as desired.
As far as the temp goes, I did see that on their website,...
You said PETG, you should NEVER run PETG below 230C...that alone may have clogged the nozzle. (If you have a real V6 hot end and not a knock off, the PTFE should be good to do this). Try heating to...
As fred said, print a square calibration cube. You can adjust the X and Y steps independently, depending on the motherboard, directly through firmware or through inserting a line of GCODE as...