+1 for using M3D FIO w/ a Pi. Some good info / step-by-step for using Octopi, Micro and M3D FIO here.
Type: Posts; User: PrintPunk
+1 for using M3D FIO w/ a Pi. Some good info / step-by-step for using Octopi, Micro and M3D FIO here.
Few people have created diy heated beds for the M3D Micro using usb mug warmers. If you have access to the M3D support forum there are some recent discussions going on about diy heated bed mods/hacks.
Seems to be a bug in the latest version of the their software. If you are using v1.4.0.9 roll back to a previous version. If you haven't checked out the user created software alternative, google...
+1 for the alum foil mod. Great tip.
- Getting good (quality, consistent) prints with ABS on M3D Micro is very difficult to achieve. The lack of a heated bed makes printing ABS problematic.
- Use the external filament feed method...
Printing with PLA or ABS?
Maybe try cranking the heat down a bit see if that helps with the blue tape pulling up.
Worst support ever = WanhaoUSA
I backed the Micro on kickstarter and have used it for 10 months or so. Fun little printer to play around with and learn on but I wouldn't recommend it for two reasons: 1) closed software 2) VERY...
I've always had trouble with the M3D Pearl White PLA and never was able to get a 'good' print with it. Others in their support forum report the same/sim issues.
M3D has some info in their knowledge base that may be helpful to you.