I have my SKR 1.4 turbo board. Still waiting for the display. I am attempting to program the WiFi module. I have never had success programming these things. We will see how it goes.
Type: Posts; User: Priusron
I have my SKR 1.4 turbo board. Still waiting for the display. I am attempting to program the WiFi module. I have never had success programming these things. We will see how it goes.
It hits only after the first layer is put down. Instead of the bed dropping, I raises slightly. This is a Corey printer. All the controls work properly.mil am able to level and set the z axis without...
I’ll try, thanks. After reset the board resets before it is able to print a file prepared using the Tronxy slicer.It still raises the bed causing the nozzle to hit the build. I am thinking I have an...
I’ll try, thanks
Well I decided to slice the cube in my Tronxy slicer. It gets warm, then starts to move into position. The controller then does a power reset. I then sliced another model and it did the same thing....
Using a Tronxy x5sa pro. Ultimaker 4.8.0. I have built quite a few items with no problems. I have changed something but I don’t know what. All the controls work on theories get as designed. I...
Thanks for the reply. I enjoy tinkering and tracking down problem as. That is how I learn. I don’t think any printer is perfect and there are a lot with a lot more problems. I just want to document...
The printer has been working great. I have tested the power off restart and it works as it is supposed too. I will be slowing up for a couple weeks because I have an enormous amount of pain in my...
I had another issue with my filament detector today. After it detected no filament, even with filament going through it, I noticed that when I pushed on the connector the blue light came on and went...
Down at the bottom of the window, change the file type to all files *.* The files on the screen card have to be run through the slicer and converted to the format your printer uses. You can’t just...
It won’t allow me to post more that one or two picture
It got finished printing so here are pics of it. Notice the bed height. I added code to my slicers to lower my bed when printing is done. I use the Tronxy slicer and Ultimaker cura. If you are...
Hi, I a, new to 3d printing. I have been reading this board quite a lot and have learned a lot. I am not a kid, I am retired and this is one of my hobbies now. I have read a lot of negative study...
I purchased my first 3d printer. It is a Tronxy X5SA Pro. I have heard a lot of negatives about it. Well I found out none of that is true. It went together extremely well. It is tight and square. I...
Sounds like you’re SD card is bad.
Thanks. I too am looking for my first printer. Now you just threw out another option to confuse the issue more. I enjoy researching my options. It helps me decide how I want my printer configured and...
Go to the site Cliff posted and download the firmware for the Ender plus. You then have to configure the firmware. It should be pretty wel configured for everything you have, but may need tweaking.
I thought I read somewhere that there was a manual on the sd card. I may be incorrect, I do misremember sometimes.
Your skills are amazing. I just read this thread and your black widow thread. Wow. I am looking at purchasing my first 3D printer. I am not afraid of building and customizing. I build drones and have...