Search:

Hi,
do not tight strong the reflector. I have tighten the reflector as strong as it it possible to change adjutment with knocking against them. The right position you can only see when the lamps are...

Nice to hear :-)

When you prepare the print with the software the lights will go on. Use the key to shut down the laser and open the door. I think than will see it and you can play with the position

yes this is important:

The frontal light shade has to be adjusted correctly. the shade of has to be aligned exactly to the backside.

You remember the L-Peaces near the lamps. The L-Peace of the...

i think the most importent thing is that you have an object that you could measure. Try to get first a nearly good print and than try to adjust the x,y,z. With the grid have an orientation. Try the...

140 C for the chamber is definitive to less. The shrinking of plastic happen at a specific temperature. The chamber temperature has to be highter than this temperature. With every layer you cool down...

What is the color of the powder before the laser get active?
the convex bottom problem is a sign of warping and you have to change your temperature setting and to check that the IR sensor is working...

yes, Sintratec try to help where they can do.
@fred_dot_u: You will not need to fill the chamber completly. For calibration i think about 3 cm powder will be enough. At the beginning you will have...

Hi Roman,
nice to see you. and the quick answer at my ticket :-)))))
I hope that every one saw my statements in a constructive positiv view. My englich is not so good than my german :-) Talking...

Sintratec sometime answer really slowly. I think it is an resource problem a lot of start up company have. If i think it take to much time to play the question and answer game with a ticket system i...

That sounds not good.....
The Reset light has the same behavior with my printer

Your are right.
On the other side most connection are safe. The nut prefents loosing. Following positions have the problems from my sight of view:
1. Laserblock (very bad if you are cleanig the...

As i wrote i hope i have a solution for my z-problem. Sintratec told me that i have an old version of coupler. The coupler is flexible. Depending of the position there is sometime more force needed...

As you can see i bought the kit from Hugoes. He made the cabling and so on. It is the crowdfunded version. But right know i think i have build the printer twice. The electric cabling is right good....

Hi,
that is nice to hear, that there are more people having a Sintratec printer. I come from Germany and i have to import the powder from Sintratec into the EU. Hopefully there will be a reseller...

Hi,
Wellcome! Nice to see aother guy here. I do not use the printer for commercial porpose, too. I have learned same interesting things and got same experiance with this printer.
One importand...