Search:

Sweet, thanks

so i have a new question concerning rep. I found a big problem with the eeprom stuff built in to rep. I can and now have a working printer by altering the arduino config.h file of my firmware. as...

so i think i have this thing finally working. im fine tuning dimensions but it seems to be good. I finally broke down and shut the eeprom off and did all calibrations straight from the firmware in...

So I found this article, because I can't stop thinking about this , even thou I'm at work.
http://minow.blogspot.com/?m=0

It seems to make more sense to me and his terms match things in my...

Yea, I'm confused now albeit .... the only adjustments I have made have been too diagnol rod length, horizontal rod length, max z height, and steps per mm. Is there a video tutorial showing me what...

https://www.dropbox.com/s/o0396u2iklp71jf/20151113_002201.jpg?dl=0
https://www.dropbox.com/s/fk4pot8zpl24szm/20151113_002209.jpg?dl=0...

I sat down , and started to just go thru the eeprom list and find out what each thing was.... then i sat down and started to measure everything and comparing it to what was in the eeprom (that was...

NEW PROBLEMS!!!! so not excited

I went thru and did all calibrations again , everything seemed fine except my diagnol rod length (for dishing) went from like 240 to 640 .... that normal?...

Haha, thanks. Wasn't saving them as .png

I am thinking of changing the effector plate for a solid pieace. The one I got is for auto level and the center (which holds the extruder) pivots so that...

https://www.dropbox.com/s/d89247ymvg2wv5r/20151111_231746.jpg?dl=0
https://www.dropbox.com/s/9330fvc76ln9nls/20151111_225158.jpg?dl=0...

I think I got it :D I'll post pics of the print I'm running at this very moment. I have learned sooooo much from you guys, so grateful

OK confirmed! From z0 to z100, I only measure it moving 80mm. So to fix this I afjust.....?

I thought Esteps was extruder steps.... but yea I'll do that as soon as I get home. I have a digital caliper btw

I have a fan, and that happened with two pieces on the print bed. When it first starts printing and and move off one edge to another , every now and then you can hear the nozzle nick it. Or moving...

the pulleys that are on the motors are aluminum.
if i check eeprom settings in repetier host it says steps per mm is 80. Im not seeing anything that would be for 3 towers.
Can i link you my...

https://www.dropbox.com/s/pw3gbaaefx0ox9q/20151110_232632.jpg?dl=0

https://www.dropbox.com/s/13c9k80jfzliuc1/20151110_232625.jpg?dl=0
...

hey guys , im back. So I have a new issue. Started priniting finally but now i seem to have an issue , where the print head actually hits the print. It will start out fine and actually get many...

Will do! Try and get that calibration tool printed tonight. Thanks again!

Okay so basically adjust my filament size a hair. Should I slow down extruder speed? Or print speed? Would a free standing fan aimed at print work?

Fair enough, I think thsee two guys will help on the quality... again, thank you to all

I'm printing pla, with 1.75 mm filamet, 4mm nozzle... those blocks where printed at 205 c.
When I was doing the extruder calibration it was literally like .2 mm off , I click 100 mm I got 100 mm....

First let me say thank you !!!
Ok now let me get you up to speed.
I got calibrations done tonight and really wanted to print somehting but didnt have time to do calibration tool , so i printed...

im not seeing esteps in the epprom setting on repiteir host , am i looking in the wrong spot or is it steps per mm ? for the extruder

and for the retraction , basically start small ... right ?

i got it , its either dead on or off by .1 im pretty sure thats in tolerence so happy right now. going to bed lol. yea next on to the extruder motor calibration , and swapping the hotend..... THERE...

i do have screws , but i did notice in the eeprom settings that i can set endstop offset, that work the same way ? and can you point me in the right direction for extruder calibration? i feel like im...