fred_dot_u
Staff Engineer

Consider to attach the STL file you are using. This will provide for more information than the photo provides.

According to the web page, the range for the nozzle temperature for Coex PLA (not other exotic filaments) is 215 to 235 degrees C. Your temperature...

In the world of home-built aircraft, also called amateur aircraft, it is a common construction practice to weld a bushing into a tube. Through this...

I've used a product from Resione named F69 Black Flexible Resin. The prints I made came out quite good and were what I consider to be durable and...

Meshmixer is truly an easy approach, but not if one is unfamiliar with it. YouTube is handy to find plane cut Meshmixer, but it's easier for me to...

If I understand your objective correctly, you are asking for the equivalent of a threaded heat set insert, but without the threads? Of course,...

You are on top of things lately. I have an RSS feed for the entire forum here and frequently the feed will contain a possible spam, but when I click...

The object is 0.05 x 0.06 x 0.09 millimeters. It's there, too small to see and too small for a 0.40 mm nozzle. Find attached a 1000x scale up of the...

https://www.immould.com/diy-injection-molding-how-to-do-injection-molding-at-home/ Pretty expensive, but certainly a possibility. For the...

Good quality is open to interpretation and in this context is effectively meaningless. Consider that one can route out a board of sufficient density...