New to 3d printing and having problems

[error77]

For christmas I received a Flashforge creator pro and I cannot seem to get a decent print out of it. I've tried tweaking the temperature, the speeds, the feed diameter, the feed stock multiplier and even tried moving the model on the build plate. Before anyone asks, yes I levelled the build plate and levelled it again and again lol. I've tried with and without a raft and sticking only seems to be an issue without a raft. The best looking model I've managed was at a temperature of 180 with a feed stock multiplier of 1.3, however this still came out wrong. It was warped on one corner and looked and felt like there wasn't enough plastic. It also clicked the whole time doing it at that temperature.


Here's a picture of the average model I'm getting, the left picture is the front and the right picture is the back.




Hopefully someone can point me in the right direction of how to fix this?